The hydraulic forging press can process working procedure of lengthening, upsetting, fine forging etc. and can also forge the round part. The hydraulic press above 25 MN can process the production of die forged piece.

 

     Along with the development of national economy, the production capability of hydraulic forging press for our company has rapidly developed. From initial stages of the new China, our company designed and produced by ourselves the 25 MN hydraulic forging press for the country, now has more than 40 years history. In the seventies, our company exported a whole set of 25 MN hydraulic forging press to Eastern Europe, this marked the technical level of design and manufacture for hydraulic forging press in our company could already export in series and in whole set to the international market. The hydraulic forging press produced by our company has features: size is complete, capability is stable, design is advance and structure is reliable. There are YDZ-D series of hydraulic free openside forging press, YDZ series of hydraulic free pillar forging press and YDZ-X series of hydraulic free pull down forging press.

 

     The main structure of YDZ-D series of hydraulic openside forging press is made up of C-type of framework steel-casting, hydraulic cylinder, plunger, pull-rod, crossbeam, control system etc. The main structure of YDZ series of hydraulic free pillar forging press is made up of steel-casting of upper crossbeam and lower cross beam, pillar etc. The upper crossbeam and lower crossbeam are pre-tightened through pillars and nuts to form closed frame and to support the whole pressure. On the movable crossbeam of steel-casting, eight sets of hyperboloidal guide bush are mounted and moved up and down through the pillar. The YDZ-X series of hydraulic free pull down forging press is the same as the hydraulic pillar forging press, but the crossbeams are fixed in the middle. The lower crossbeam and upper crossbeam are pre-tightened through pillars and nuts to form a closed frame to support the whole pressure. The working cylinder is installed on the lower crossbeam. The whole frame can move up and down.

 

     There are many of control form for hydraulic press. At present, the effective form of controlling small and middling type of hydraulic press is servo system of hydraulic valve. Through proving at practice, the operation of this control system is convenient, agile, correct and reliable. For the large tonnage of hydraulic press, the loop control system of D.C motor and control transformer is used. Hydraulic power is supplied by water pump, pressure reservoir and oil pump.

 

Explanation of type and size
    Y  ¡õ - ¡õX X
            Nominal pressure£¨MNX100£©
            Empty-pillar type£¬D-openside type£¬X-pull down type
            Z-free
            Forging
            Hydraulic press

 

The parameter table for YDZ-D series of hydraulic free open side forging press

Type and size	YDZ-D315	YDZ-D350	YDZ-D500	YDZ-D800
Nominal pressure      MN	3.15	3.5	5	8
Liquid pressure       MPa	20	20	20	20
Working  stroke       mm	500	700	800	100
Working  speed       m/s		0.1	0.1
Speed of idle stroke     m/s		0.4	0.4
No. of working       min-1	15	30	24	20
No.of fast forging     min-1	20	90	60-90	60-80
Closed height         mm	1200	1730	1830	2000
Stroke of moving working table               mm		1000	1500	1600
Equipment weight      t	17.23	101.4	114.6	136.1
Outline dimension      m		11.265X7.625X8.718	16.35X10.8X9.33	13.64x4.2x8.16

The parameter table for YDZ series of hydraulic free forging press

Type and size	YDZ100	YDZ200	YDZ500	YDZ300
Nominal pressure      MN	10	20	25	30
Liquid pressure       MPa	20	20	32	32
Stroke of movable crossbeam    mm	800	1800	2000	2000
Working stroke        mm		180	200	200
Working speed        m/s		0.1	0.15	0.15
Speed of idle stroke    m/s		0.3	0.3	0.3
No. of working       min-1		8-10	10-12	8-10
No. of fast forging    min-1		35-45	35-45	35-45
Distance of pillars      mm	1480X1350	3000X1600	3400X1600	3657X1524
Closed height         mm	1750	3800	3900	3815
Dimension of table surface      mm	2100X900	6000X2000	5000X2000	6000X2200
Equipment weight        t	34	488.3	5512	620
Outline dimension       m	2.74X2.25X4.86	26.88X15.78X13.74	27.36X13.76X13.74	26.8X15.2X13.15

The parameter table for  YDZ hydraulic free pillar forging press

Type and size	YDZ 600	YDZ 12500
Nominal pressure            MN	60	125
Liquid pressure            MPa	32	32
Stroke of movable crossbeam  mm	2600	3000
Working stroke               mm		275
Working speed               m/s	0.1	0.1
Speed of idle stroke        m/s	0.3	0.25
No. of working            min-1	4-12	5
No. of fast forging       min-1	15-20	20
Pillar gap                  mm	400X2600	6300X3458
Closed height               mm	4500	7000
Dimension of table surface  mm	8000X3150	10000X4000
Equipment weight             t	1362.4	2658.5
Outline dimension             m	31.6X20.5X22.357	44.435X26.57X23.55

 

The parameter table for YDZ-X series of hydraulic free pull down forging press

Type and size		YDZ-X 3000
Nominal pressure                  MN		30
Liquid pressure                   MPa		32
The Max. stroke                   mm		2000
Clear clearance                   mm		4000
Center distance of upright column  mm		5000
Clear distance between upright column  mm		2800
Dimension of working table    mm		4500X2000
Stroke of working table  (L/R)   mm		1200
Common forging	Stroke  mm	300
	No.  min-1	15
Fine forging	Stroke  mm	25
	No.  min-1	60
Drive form		Drive directly by oil pump